Keep Your Bracelet Looking and Feeling Its Best

Every BrightPather bracelet is created from a combination of beads, stones, pearls, metal details, charms and elastic cord. Each material responds differently to water, heat, chemicals and daily wear.

A little thoughtful care can help preserve the color, finish, structure and comfort of your bracelet for longer.

Everyday Care

Your bracelet is designed to be worn and enjoyed, but it should not be treated as an object that is completely resistant to water, pressure or chemicals.

For everyday wear:

• Put your bracelet on after applying perfume, lotion, sunscreen or cosmetics.
• Remove it before showering, swimming, exercising or sleeping.
• Avoid pulling, stretching or twisting the bracelet unnecessarily.
• Keep it away from hard surfaces that may scratch or chip the beads.
• Remove it before household cleaning, gardening or heavy manual work.
• Handle charms, focal beads and metal spacers with care.

Natural materials can gradually change in appearance through frequent contact with skin oils, moisture and sunlight. This is normal, but careful wear can reduce unnecessary damage.

Avoid Water and Moisture

We recommend removing your bracelet before:

• Showering
• Bathing
• Swimming
• Washing dishes
• Entering a sauna or steam room
• Exercising heavily
• Sleeping with wet hair or damp clothing

Water can affect elastic cord, metal plating, adhesive, dyed materials, pearls and certain natural stones.

Chlorinated water, salt water and hot water may cause faster discoloration or weakening than ordinary water.

If your bracelet gets wet, gently dry it with a soft, clean cloth and allow it to air-dry completely before storing it.

Do not use a hair dryer, heater or direct sunlight to speed up the drying process.

Keep Away From Chemicals

Perfume, hairspray, lotion, sunscreen, hand sanitizer and household cleaners may react with natural stones and metal components.

Some products may:

• Dull polished surfaces
• Change the color of metal plating
• Leave residue between beads
• Damage elastic cord
• Affect dyed or coated materials
• Reduce the natural luster of pearls

Allow skincare and fragrance products to dry before putting on your bracelet.

As a simple rule:

Your bracelet should be one of the last things you put on and one of the first things you take off.

How to Clean Your Bracelet

For regular cleaning, use a soft, dry, lint-free cloth.

Gently wipe each bead, charm and metal component to remove dust, moisture and skin oils.

For areas between beads, use a soft, dry brush with light pressure.

Do not soak the bracelet in water.

Do not use:

• Jewelry cleaning solutions
• Ultrasonic cleaners
• Steam cleaners
• Alcohol
• Bleach
• Vinegar
• Toothpaste
• Abrasive powders
• Hard brushes
• Metal polishing liquids

These methods may damage natural stones, pearls, surface coatings, elastic cord or plated metal components.

When stronger cleaning seems necessary, contact BrightPather before applying any product.

Caring for Natural Stones

Natural stones may contain differences in:

• Color
• Transparency
• Pattern
• Texture
• Small inclusions
• Surface markings

These characteristics are part of the natural material and are not necessarily defects.

Some stones are more sensitive than others. Prolonged exposure to sunlight, water or chemicals may cause fading, dullness or surface changes.

To care for natural stone beads:

• Wipe them gently after wear.
• Avoid prolonged direct sunlight.
• Do not soak them.
• Avoid sudden temperature changes.
• Keep them away from harder jewelry that may scratch them.
• Store the bracelet separately when it is not being worn.

Natural stones should be treated as individual materials rather than as identical factory-made beads.

Caring for Pearls

Pearls are softer and more sensitive than many stones.

They can be affected by perfume, cosmetics, sweat and cleaning products.

To protect pearl components:

• Keep them away from chemicals.
• Wipe them gently after wear.
• Do not soak them in water.
• Do not use jewelry cleaning liquids.
• Avoid rubbing them against metal or hard stones.
• Store them in a soft pouch or lined box.

The surface of a pearl can scratch more easily than the surface of many polished gemstones.

Caring for Metal Spacers and Charms

Metal spacers, initials and charms may naturally change over time, especially when exposed to moisture, perfume, sweat or air.

Plated components may gradually lose some of their original finish through repeated friction and wear.

To slow this process:

• Keep metal details dry.
• Avoid direct contact with perfume and lotion.
• Wipe them after wearing.
• Store the bracelet in a dry environment.
• Avoid rubbing the bracelet against watches or other jewelry.

A gradual change in metal tone can occur through normal use and does not always indicate a manufacturing problem.

Caring for Elastic Cord

Many beaded bracelets use elastic cord to provide flexibility and comfort.

Elastic cord can weaken over time through stretching, heat, chemicals and repeated moisture exposure.

To help protect it:

• Roll the bracelet gently over your hand instead of pulling it open widely.
• Avoid stretching it for play or testing.
• Do not hang the bracelet from one side.
• Keep it away from hot water and high heat.
• Remove it before exercise and sleep.
• Check the cord regularly for thinning, fraying or looseness.

When putting on the bracelet, keep your fingers together and gently roll it over the widest part of your hand.

When removing it, roll it off instead of pulling one side outward.

How to Store Your Bracelet

Store your bracelet in a clean, dry place when it is not being worn.

Recommended storage:

• A soft jewelry pouch
• A lined jewelry box
• A separate compartment
• A clean, dry drawer away from sunlight

Avoid:

• Bathrooms
• Humid rooms
• Windowsills
• Direct sunlight
• Hot vehicles
• Open surfaces exposed to dust
• Storage with sharp or heavy jewelry

Store each bracelet separately where possible. This helps prevent stones, pearls and metal charms from scratching one another.

Do not place heavy objects on top of the bracelet.

Travel Care

When traveling, place your bracelet in a soft pouch or small jewelry case.

Do not leave it loose inside a handbag, suitcase or pocket, where it may be crushed, stretched or scratched.

Before packing:

• Make sure the bracelet is dry.
• Close any removable components securely.
• Keep it separate from keys and metal accessories.
• Avoid leaving it inside a hot vehicle.
• Do not pack it underneath heavy items.

For longer journeys, a structured jewelry case offers better protection than a soft pouch alone.

When Not to Wear Your Bracelet

Remove your bracelet before:

• Swimming
• Showering
• Exercising
• Sleeping
• Cleaning
• Cooking with strong oils or chemicals
• Applying skincare or fragrance
• Handling heavy objects
• Visiting a sauna or steam room
• Participating in contact sports

Your bracelet is a wearable design piece, but it is not intended for continuous exposure to all daily activities.

Check Your Bracelet Regularly

Inspect your bracelet from time to time, especially if it is worn frequently.

Look for:

• Loose charms
• Worn connectors
• Frayed elastic
• Enlarged gaps between beads
• Cracked or chipped components
• Changes in the knot area
• Excessive stretching
• Damaged metal loops

Stop wearing the bracelet if the elastic appears weak or if a charm connection becomes loose.

Continuing to wear a damaged bracelet may lead to material loss.

What to Do if Your Bracelet Breaks

If your bracelet breaks, collect and store as many components as possible.

Place the beads, charms and other parts in a secure bag or container.

When contacting BrightPather, provide:

• Your order number
• The name of the saved design
• Clear photos of the bracelet
• A photo of the damaged area
• A description of what happened
• The approximate date the issue occurred

Repair availability depends on the bracelet structure, material condition and current component availability.

Natural materials and limited components may not always have an exact replacement.

Natural Changes Over Time

A bracelet that is regularly worn may gradually develop signs of use.

These may include:

• Slight changes in metal tone
• Reduced surface shine
• Small scratches
• Changes caused by skin oils
• Softening of polished surfaces
• Minor stretching of elastic cord

These changes are part of normal wear and can vary depending on frequency of use, environment, skin chemistry and care habits.

Careful handling can slow these changes but may not prevent them completely.

A Simple Care Routine

After wearing your bracelet:

1. Remove it gently without overstretching.
2. Wipe it with a soft, dry cloth.
3. Check that the elastic and charms appear secure.
4. Allow any moisture to dry naturally.
5. Store it separately in a soft, dry place.

This short routine can make a meaningful difference over time.

Bracelet Care FAQ

Can I wear my bracelet in the shower?

We recommend removing it before showering. Repeated exposure to water, soap and heat may affect the cord, metal finish, pearls and certain natural stones.

Can I swim while wearing it?

No. Chlorine and salt water can damage several bracelet materials and may weaken elastic cord.

Can I clean it with jewelry cleaner?

Do not use jewelry cleaner unless BrightPather has confirmed that it is suitable for every material in the bracelet. A product that is safe for one component may damage another.

Can I use alcohol or hand sanitizer on it?

Avoid direct contact with alcohol and hand sanitizer. Allow your hands to dry fully before wearing or touching the bracelet.

Why has the metal color changed?

Metal components may gradually change through contact with moisture, air, perfume, skin oils and friction. The rate of change depends on the material and how the bracelet is worn.

Why does my bracelet feel looser?

Elastic cord may gradually relax through repeated wear, overstretching, heat or moisture. Stop wearing the bracelet if the cord appears weak or damaged.

Are small marks on natural stones normal?

Natural stones may contain small inclusions, patterns, color differences and surface characteristics. These natural variations do not necessarily indicate damage.

Can I sleep while wearing my bracelet?

We recommend removing it before sleeping. Pressure, friction and accidental stretching can damage the bracelet.

How often should I clean it?

A gentle dry wipe after wearing is usually enough for regular care. More frequent cleaning may be helpful in warm weather or after extended wear.

How should I store several bracelets?

Store them separately or use divided compartments to prevent scratching, tangling and pressure between different materials.

Need Help With Your Bracelet?

Have a question about cleaning, storage, materials or a damaged component?

Send us your order number, saved design name and clear photos so the BrightPather team can better understand the issue.

Button: Contact BrightPather Support

Care for the Details That Carry Your Story

Your bracelet was created from choices you made—its colors, materials, balance and meaning.

Treat it gently, store it thoughtfully and let it remain part of your path for as long as possible.

Primary Button: Start Designing
Secondary Button: Contact Us